vxi_installation_guide:dialer:start [Voximal documentation]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Outbound Dialer ======

[[vxi_installation_guide:start|Home]] >


===== Dialer Installation =====

Dialer is an addon for VoiceXML Browser to provide automatic outbound dialing.

Use root to install the packages. Unzip and untar the dialer package by using the command:

<code>
# tar xvzf dialer_Vx.x_date.tar.gz
</code>

Go to the directory of the dialer and then, type the following command.

<code>
# cd dialer_Vx.x_date
# ./install.sh
</code>


===== Dialer configuration =====

It uses the Asterisk Manager Interface.
 It uses the Asterisk Manager Interface. Voximal will work from scratch with dialer, older versions named VXI* will needs option **userevents=yes** in [license] section. 

To enable the dialer to connect to the Asterisk you need to setup the interface.
You can create a "Dialer" account to connect the Dialer application.
Edit /etc/asterisk/manager.conf and set :

<code>
...
[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0
...

...
[dialer]
secret = 1234
;deny=0.0.0.0/0.0.0.0
;permit=209.16.236.73/255.255.255.0
read = system,call,user,originate
write = system,call,user,originate
...
</code>


===== Dialer application =====

<code>
Dialer [options] param
</code>

Options:

|–safe |Starts in "safe" mode (auto-restart). |
|–k | clipping, update call row just at the end of call with final results only (override by "clipping" bool dialer.conf file option)|
|–help |This help screen. |
|–stop |Unconditionally stop the dialer. |
|–start |Run as a daemon. |
|–action |Execute one if this commands: |
|createdatabase |Create the database. |
| dropdatabase |Drop the database. |
| create |Create the campaign table. |
| drop |Drop the campaign table. |
| truncate |Remove all the phones. |
| file |Use the text file to fill the campaign. |
| insert |Insert a phone in the campaign. |
| delete |Delete a phone in the campaign. |
| count |Phones in the campaign. |
| dump |Dump the campaign in csv. |
| fulldump |Dump the campaign in csv with header. |
| statitics |Statistics of the campaign. |
|–campaign |Name of the campaign for the command. |
|–paramater |Parameter for the command. |


NOTE: Dialer is an application located at this directory:

<code>
/opt/dialer/
</code>

===== Dialer commands =====

Purge and create a campaign named "campaign" :
    >dialer -c campaign -a drop
    >dialer -c campaign -a create
    >dialer -c campaign -a file /tmp/list.txt
    >dialer -c campaign -a insert -phone 12345678
    >dialer -c campaign -a insert -phone 12345678 param

Start  in background :
    >dialer --start
    
Start do not fork, stop on last call :
    >dialer

Stop all dialer (killall)  :
    >dialer --stop

Get log :
    >dialer -a fulldump -c campaign

Get statistics :
    >dialer -a statistics -c campaign 


===== Call Return Codes =====

The dialer generates return's codes for each call in the Log file. Please find here the list of codes and its description:

|-8 |Burned (We give up) |
|-7 |Disconnected Number – No Answer |
|-6 |Fax Machine |
|-5 |Network Congestion |
|-4 |Busy |
|-3 |Voicemail – Get called back |
|-2 |No Answer |
|-1 |Undefined%%*%% |
|1 |Not Yet Called – Get called back |
|0 |Callback |
|2 |No Answer |
|3 |Voicemail – Get called back |
|4 |Busy |
|5 |Fast Busy |
|6 |Fax Machine |
|7 |Disconnected Number |
|8 |Do Not Call – Don't count as contacts |
|9 |Invalid Lead |
|10 |No Sale |
|11 |No Sale – These both… |
|12 |Sale – count as contacts |

===== Configuration file =====

The dialer's configuration file is located at:

<code>
/etc/dialer.conf
</code>

Please find here the list of codes and its description:

<code>
;
; Dialer Configuration
;

[general]
debug=true
log=true
mysqlhost=localhost
mysqluser=dialer
mysqlpassword=dialeri6net
asteriskuser=dialer
asteriskpassword=1234
asteriskhost=localhost
asteriskport=5038
mysqldatabase=dialer

[default]
active=true
function=vxml
calltoday=true  ;this avoid call attempts same day, caution!
usednc=false
maxlines=30
attemptsdelay=600
timeout=5000 ; max time in ms before line comes UP
dspmode=none
multiplecalls=false
trunk=SIP
dialprefix=none
callerid=9987803065
filter=0
chanvar=0
chanstr=0
debug=true
skip=0
f_mode=0
f_areacode=0
f_areacode_prefix=0
f_zipcode=0
orderby=attempts_pickups
mode=vxml
timeslot=9h-18h
pause=none
blacklist=none
attempts=1
dialformat=SIP/00%s@voztele-out
maxcaps=10
</code>

Default is the default section campaign parameters.

<code>
Parameters:
active=true                   
function=vxml
calltoday=true                  ; Set it true if you do not do any attemps, nor care of today, simpified loop SQL
usednc=false
maxlines=30			; Number of simultaneous calls
maxcaps=10                      ; Number of calls added on each iteration, "speed of dialing"
attemptsdelay=600		; Delay in seconds between two attempts, default 10minutes (600 seconds)
timeout=5000			; Time out
dspmode=none
multiplecalls=false
trunk=SIP			; Trunk type SIP
dialprefix=none
callerid=9987803065		; SIP account
filter=0
chanvar=0
chanstr=0
debug=true                      ; Enable very verbose debug, and debug files in /tmp
skip=0
f_mode=0
f_areacode=0
f_areacode_prefix=0
f_zipcode=0
orderby=attempts_pickups
mode=vxml                       ; Use VXML uri
uri=http://some/index.vxml
timeslot=9h-18h			; Timeslot
pause=none
blacklist=none
attempts=1			; Number of Attempts (1..n  calls)
dialformat=SIP/00%s@voztele-out	; Dial format chain
clipping=false                  ; do not update intermediate call status, speed up calling
</code>

===== Dialer Web interface =====

Access to Dialer Web Control Panel at:

<code>
http://yourserver/dialer/
</code>