Differences

This shows you the differences between two versions of the page.

--- installation_guide:raspbx [2016/11/05 14:21] – borja
+++ installation_guide:raspbx [2016/11/07 09:43] (current) – [Use a GSM/USB dongle (option)] borja
@@ Line 1: / Line 1: @@
-====== Install on the RasPBX ======
+====== Install on the RasPBX (Asterisk for Raspberry Pi) ======
 {{:installation_guide:raspberry:cropped-winter_pic_small1.jpg?300|}}
@@ Line 13: / Line 13: @@
   * Asterisk 13.11.2
   * FreePBX 13.0.188.8
+==== Install the RasPBX suite ====
 Follow those instruction to flash the SD image :
   * [[https://www.raspberrypi.org/documentation/installation/installing-images/README.md|Flash Image (from raspberrypi.org)]]
-If you want to connect you raspberry with Wifi, please follow those steps :
-  * [[https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md|Configure Wifi (from raspberrypi.org)]]
-RasPBX already install Asterisk with FreePBX so you only need to complete your installation with the Voximal package :
-Get it from  :
-  * [[http://downloads.voximal.com/voximal/raspbian8/armhf/latest.tar.gz|Lastest Voximal/Rasberry package]]
 Connect to SSH (raspbx/raspberry) to complete the installation with the Voximal installer package. The default login acces is :
@@ Line 129: / Line 123: @@
 root@raspbx:~#
 </code>
+==== Install the Voximal module ====
+RasPBX already install Asterisk with FreePBX so you only need to complete your installation with the Voximal package :
+Get it from  :
+  * [[http://downloads.voximal.com/voximal/raspbian8/armhf/latest.tar.gz|Lastest Voximal/Rasberry package]]
 You can directly download the Voximal package with the wget tool :
@@ Line 182: / Line 183: @@
+==== Connect with WIFI (option) ====
+If you want to connect you raspberry with Wifi, please follow those steps :
+  * [[https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md|Configure Wifi (from raspberrypi.org)]]
+==== Use a GSM/USB dongle (option) ====
+A highly affordable GSM access can be obtained using Huawei E155X or compatible USB modems and chan_dongle, providing both inbound and outbound calls on GSM/3G networks.
+Chan_dongle is able to work with many different USB modems from Huawei, such as K3715, E169 / K3520, E155X, E175X, K3765 and others.
+  * [[https://github.com/bg111/asterisk-chan-dongle/wiki/Requirements-and-Limitations|Compatibility list]]
+  * [[http://www.raspberry-asterisk.org/documentation/gsm-voip-gateway-with-chan_dongle|More information]]
+You can use the integrated dongle channel to get calls from a plug.
+<code>
+root@raspbx:~# install-dongle
+Installing GSM VoIP gateway with chan_dongle.
+Please read the documentation at http://raspbx.org/dongle
+Please enter the phone number of your SIM card
+(defaults to +1234567890 if left blank):
+Send incoming SMS to email address
+(leave empty to disable SMS forwarding):
+Forward incoming SMS to mobile phone number (via dongle0)
+(leave empty to disable):
+Reading package lists... Done
+Building dependency tree
+Reading state information... Done
+The following extra packages will be installed:
+  libjim0.75 usb-modeswitch-data
+...
+Would you like to install a webpage for sending SMS with
+chan_dongle? (http://raspbx/sms/) [y/N] n
+Please wait...
+!!!!amportal is depreciated. Please use fwconsole!!!!
+forwarding all commands to 'fwconsole'
+Running FreePBX shutdown...
+Shutting down Asterisk Gracefully. Will forcefully kill after 30 seconds.
+Press C to Cancel
+Press N to shut down NOW
+[============================] 1 sec
+Running FreePBX startup...
+Starting Asterisk...
+[============================] 57 secs
+Asterisk Started
+Your configuration has been saved successfully to these files:
+/etc/asterisk/dongle.conf
+root@raspbx:~#
+</code>
+You will need to configure and **inband route** to link the incomming calls to the Voximal application and account.
+==== Test your installation ====
+You have two simple ways to test and validate your installation :
+  * With a soft phone : [[installation_guide:softphone:start|Soft Phone connection]]
+  * With the test numbers : [[installation_guide:test:start|Call the test service]]